dB Technologies VIO L210

Line Array sistem, LF 2x10", HF 1x1,4", snage 900W.

Pozvati za cenu
Dostupnost: Povremeno na lageru, proverite dostupnost
SKU
VIO L210

PDV uračunat u cenu i nema skrivenih troškova

UNIQUE ACOUSTIC DESIGN COMBINING LONG THROW AND DETAILED AUDIO PERFORMANCE

VIO L210's premium low-freq transducers, positioned in a V form and sealed in  a bass reflex wooden enclosure, have been custom designed to improve efficiency and to last in high stress conditions, providing an accurate transient response and an extended low-end reproduction. 

One single 3” voice coil compression driver (1.4” exit throat) accurately delivers high frequencies. A brand new waveguide contributes to create a cylindrical wavefront, allowing a very precise high-frequency directivity control, much to the advantage of the system’s throw distance.

The acoustic enclosure is completed by two massive aluminium phase plugs located in front of both woofers which acts as a prosecution of the constant directivity high-frequency waveguide.

Each phase plug features 26 diamond-shaped holes aimed at reducing any interference within the crossover zone while improving frequency and transient response.

 

ADVANCED DSP PAIRED WITH NOTABLE EFFICIENCY

The module features a highly efficient Class D Digipro G3 900 W RMS  amplifier which is perfectly capable of achieving 135 dB SPL.

A perfectly coherent coverage is granted even at a long distance thanks to advanced sound processing with FIR filters.

The pre-amp module is also equipped with a digital optical isolation which avoids audio coupling, preventing any noise created by potential differences. 

 

SMART RIGGING HARDWARE & ACCESSORIES TO SPEED UP SET UP OPERATIONS

The VIO L210 comes with a built-in 3-point rigging system allowing a smooth and fast set up of the system. The 2 front links easily connect the modules from every angle. The back central rigging strand is equipped with a hook type link to set the relative splay angles determined via the prediction software dBTechnologies Composer. While lifting up the array, the rigging strand will automatically block the systems at the preset angles. 

Informacije
New label No
Specifikacija
Technical Data
Speaker Type
2-way Active Line Array Module
Acoustical data
Usable Bandwidth [- 6 dB]
67-20,000 Hz
Frequency Response [+/- 3dB]
78-18,100 Hz
Max SPL
135 dB
HF
1x1.4"
Voice Coil HF
3"
Type HF
Neodymium, Titanium Diaphragm
LF
2x10"
Voice Coil LF
2.5"
Type LF
Neodymium Aluminium Phase Plug
Horizontal Directivity
100°
Vertical Directivity
depends on array size and configuration
Amplifier
Amp Technology
Digipro G3
Amp Class
Class-D
Power RMS
900 W
Peak Power
1800 W
Cooling
Convection
Power Supply
900 W SMPS with Auto-range PSU
Processor
Controller
DSP 56 bit
AD/DA Converter
24 bit/48 KHz
Limiter
Dual Active Multiband Peak, RMS, Thermal
Processing (filters)
FIR Linear Phase
Crossover Frequency LF-HF
950 Hz
Slope LF-HF
24 dB/Octave
Input
Signal Input
1xXLR fem, Bal.
Signal Output
1xXLR male, Bal.
Network
RDNet remote control RJ45 connector IN/OUT
Power Socket
1xPowerCon TRUE1 IN 
1xPowerCon TRUE1 Out
Controls
1xSpeakers Coupling (7 presets)
1x HF Compensation (8 presets)
1XInput Attenuation Rotary Switch
Mechanics
Housing
Multiplex Plywood 
Polyurea painted
Housing Design
Trapezoidal 10°
Handles
2x side
Rain Cover
Included
Rigging Points
Integrated rigging hardware
Width
720 mm (28.35 in)
Height
320 mm (12.6 in)
Depth
520 mm (20.47 in)
Weight
28.6 Kg (63.00 lbs)