DPA Microphones d:fine™ CORE 4188, TA4F Mini-XLR

Usmereni pilot mikrofon, kardioidne karakteristike, 120 mm dužina nastavka sa mikrofonom, za konferencije, govor i žive nastupe.

Pozvati za cenu
Dostupnost: Povremeno na lageru, proverite dostupnost
SKU
d:fine™ CORE 4188, TA4F Mini-XLR

PDV uračunat u cenu i nema skrivenih troškova

d:fine CORE 4188 Slim Directional Flex Headset Mic, 120 mm Boom, Black, Hardwired TA4F Mini-XLR

Combining the legendary sound of the 4088 Directional Capsule with the lightweight and flexible d:fine Headset system, the d:fine 4188 Directional Headset Microphone is ideal for both spoken word and vocal performance applications. It offers accurate and natural voice intelligibility and very high-SPL capabilities - users can both speak and sing into the mic with no hint of distortion.

This mic provides excellent off-axis rejection in high-SPL situations. It efficiently suppresses distant sound sources making it perfect for demanding live performance environments where background noise and feedback are concerns. In high-SPL events, or when feedback is a concern, the 4088 Directional Capsule will tackle these challenges with ease. The bass response is designed for optimal linearity at 2-3 cm (1 in) from the sound source. This means that the bass roll-off will be relatively prominent at a greater distance - a paramount factor when it comes to rejection of background noise and in the fight to avoid feedback. The microphone capsule is also optimized for low distortion as well as humidity resistance.

  • Pristine audio quality
  • Lightweight and flexible
  • Easy mounting to the left or right
  • Minimal visual impact
  • Resistant to humidity
  • Flexible adapter system fits most professional wireless systems
Informacije
New label No
Specifikacija
  • Directional pattern: Cardioid
  • Principle of operation: Pressure gradient
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 20 Hz - 20 kHz
  • Frequency range, ±2 dB, Near field 2-3 cm (0.8 - 1.2 in): 100 Hz - 20 kHz with 3 dB soft boost at 8 - 20 kHz
  • Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 68 dB(A)
  • Total harmonic distortion (THD): < 1% up to 123 dB SPL peak, < 1% up to 120 dB SPL RMS sine
  • Dynamic range: Typ. 95 dB
  • Max. SPL, peak before clipping: 144 dB
  • Output impedance:
  • From MicroDot: 30 - 40 Ω.
  • From DAD6001-BC: 100 Ω
  • Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
  • Output balance principle: Signal balanced with DAD6001-BC XLR Adapter
  • Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
  • Power supply (for full performance): Min. 5 V to max. 50 V through DPA adapter for wireless systems
  • Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
  • Connector: Hardwired TA4F Mini-XLR
  • Color: Black
  • Weight:
  • Microphone boom: 0.8 g (0.03 oz).
  • Earhook: 1.1 g (0.04 oz).
  • Cabel: 6.6 g (0.23 oz).
  • Total: 8.5 g (0.30 oz)
  • Microphone diameter: 5.4 mm (0.21 in)
  • Cable length: 1.3 m (4.3 ft)
  • Cable color: Black
  • Cable diameter: 1.6 mm (0.06 in)
  • Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)
  • Electromagnetic compatibility (EMC): Fully compatible
  • Temperature range: -40°C to 45°C (-40°F to 113°F)
  • Relative humidity (RH): Up to 90%