Shure BETA 91A

Kondenzatorski mikrofon granične površine, polukardioidne karakteristike, sa integrisanim preptopjačalom i XLR konektorom, namenjen za snimanje bas bubnja, kao i drugih instrumenata niske frekvencije, uključujući i klavir

44.900,00 RSD
Dostupnost: Na lageru
SKU
BETA91A

PDV uračunat u cenu i nema skrivenih troškova

Shure BETA 91A is available to buy in increments of 1

The Shure BETA®91A is designed for use with kick drums, as well as other traditional low-frequency applications including piano. Featuring an updated microphone capsule, integrated preamplifier, and XLR connection, Beta 91A offers a strong low-frequency response and is specifically tailored for bass frequency applications. The Beta 91A combines superior attack and punch for studio-quality sound, even at extremely high sound pressure levels (SPL).

Features

  • Uniform half-cardioid polar pattern for maximum gain-before-feedback and rejection of off-axis sound
  • Precision-engineered low-profile design features integrated preamplifier and XLR connector to maximize setup efficiency while minimizing stage clutter
  • Frequency response tailored for kick drum/low frequency applications with a wide dynamic range for use in high SPL environments
  • Two-position contour switch to maximize attack and clarity depending on application: select the flat response setting for natural sound in most applications or the “low-mid scoop” setting for a strong low frequency “punch” with plenty of higher frequency attack
  • Requires no external mounting or accessories for ease of use and storage
  • Furnished with zipper pouch
Informacije
New label No
Specifikacija

Type

Electret Condenser

Frequency Response

20 to 20,000 Hz

Polar Pattern

Half-cardioid (cardioid in hemisphere above mounting surface)

Impedance

 146 Ohms

Sensitivity (at 1 kHz, open circuit voltage)

 

-48.5 dBV/Pa (3.8mV)

1 Pascal=94 dB SPL

Maximum SPL (1 kHz at 1% THD)

1000 Ohm load: 151 dB, 2500 Ohm load: 155 dB

Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz)

 

64 dB

S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise, A-weighted

Dynamic Range (at 1 kHz)

 

1000 Ohm load: 121.5 dB

2500 Ohm load: 125.5 dB

Common Mode Rejection (20 Hz to 20 kHz)

 > 55 dB

Clipping Level (20Hz-20 kHz at 1% THD)

 

1000 Ohm load: 7.50 dBV, 2500 Ohm load: 12.5 dBV

THD of microphone preamplifier when applied input signal is equivalent to cartridge output at specified SPL

Self Noise (typical, equivalent SPL, A-weighted)

29.5 dB SPL-A

Polarity

 Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3

Weight

Net: 470 g (16.6 oz.)

Frequency Contour Switch

7 dB of attenuation centered at 400 kHz

Connector

Three-pin professional audio (XLR), male, balanced

Power Requirements

11-52 Vdc phantom power, 5.6 mA