Vox AC30HW2X
hand-wired combo amp; two Celestion Alnico Blue speakers
235.880,00 RSD
Dostupnost:
Na lageru
SKU
100010819000
Vox AC30HW2X is available to buy in increments of 1
• Hand-wired turret board construction
• Birch-ply cabinets featuring solid bracing and a natural high frequency diffuser
• All-tube design
• ECC83/12AX7 preamp tubes (x3)
• EL84 power tube quartet; (AC30 models); EL84 Duet (AC15 models)
• GZ34 rectifier (AC30 models); EZ81 rectifier (AC15 models)
• Fitted with matched Ruby Tubes that provide extended dynamic range
• Traditional VOX two-channel design.
• Top Boost and Normal. High and Low inputs for each channel
• The Normal channel provides an additional BRIGHT switch.
• The top boost channel provides a HOT/COOL switch to achieve even more gain
• Master Volume/BYPASS switch completely bypasses the Master Volume section
• OP mode switch cut the amp’s Output Power level in half
• Vintage fawn-colored vinyl, reminiscent of the 1960 classic AC30
• Choose either Celestion Alnico Blue or Celestion G12M Greenback
• VFS1 footswitch controlls the Top Boost channel's HOT/COOL switch
• A premium, custom-fit dust cover is included with every model
New label | No |
---|---|
Specifikacija | AC30HW2X Output Power: 30 Watts RMS into 8/16 Ohms Tube Complement: Preamp: ECC83/12AX7 (x3), Power amp: EL84 (x4), Rectifier: GZ34 Speakers: 12” Celestion Alnico Blue (x2); 8 Ohm Inputs: NORMAL Channel Jacks: HIGH (x1); LOW (x1) TOP BOOST Channel Jacks: HIGH (x1); LOW (x1) FOOT SWITCH Jack Outputs: POWER OUTPUT Jack (x2 for external/extension speakers ) Dimensions (W x D x H): 705 x 260 x 550 mm / 27.76 x 10.24 x 21.65 inches Weight: 32 kg / 70.6 lbs. Included items: Power cable, VFS1 footswitch, Dust cover AC30HW2 Output Power: 30 Watts RMS into 8/16 Ohms Tube Complement: Preamp: ECC83/12AX7 (x3), Power amp: EL84 (x4), Rectifier: GZ34 Speakers: 12” Celestion G12M Green Back (x2); 8 Ohm Inputs: NORMAL Channel Jacks: HIGH (x1); LOW (x1) TOP BOOST Channel Jacks: HIGH (x1); LOW (x1) FOOT SWITCH Jack Outputs: POWER OUTPUT Jacks (x2 for external/extension speakers) Dimensions (W x D x H): 705 x 260 x 550 mm / 27.76 x 10.24 x 21.65 inches Weight: 30.8 kg / 67.9 lbs. Included items: Power cable, VFS1 footswitch, Dust cover |